Monitor and evaluate conductivity, UV and temperature for automated process controls.
KONDUiT is an add-on module ready to use with Spectrum® KR2i and KMPi TFF Systems and Pro-Connex™ Flow Paths, with the ability to scale from 1mL to 1000L process volumes. Using single-use, gamma stable sensors, the KONDUiT can be used with hollow fiber or flat sheet TFF filters and can automate process control parameters defined by weight, conductivity, and UV independently or in conjunction with each other.
To the existing integrated functions of the KR2i and KMPi systems, KONDUiT adds:
End point conductivity control for ultrafiltration / diafiltration operations
End point UV control for diafiltering free drug from drug delivery particles
End point UV control for concentration of certain molecules
UV alarm for monitoring membrane breakthrough
Real-time temperature monitoring
Two independent temperature/conductivity readings
Simultaneous monitoring of 2 wavelengths: 260nm and 280nm
KONDUiT side view
2 conductivity and 2 UV ports
KONDUiT side view
KONDUiT power button and communication port
Dimensions (L x W x H):
7 ¾ x 4 ¾x 4 ½
Rated for pressure up to 75 psi (5 bar)
Range: 0.1 to 100 mS/cm
Accuracy: From 0.1 to 2 mS/cm ± 0.1 mS/cm; 2 to 50 mS/cm ±5% of reading; 50 to 100 mS/cm typically ±5% of reading
Accuracy: Better than ±0.2°C (typically better than 0.1°C)
Output signal: 4-20 mA sourcing with 400 ohm maximum at 24 VDC; scaled to 0-2 AU with repeatability of 1% of full scale (0.02 AU)
Typical Response Time: 1 second
Maximum Zero Shift: <2% of full scale (<0.040 AU)
Long Term Output Drift: <5% per month of full scale (<0.100 AU)
Walkaway TFF Automation
You can do it with KONDUiT.
Monitor and evaluate key tangential flow filtration parameters for automated process control.
Schedule a Lunch and Learn today.
for more information:
call Customer Service at (800) 634-3300 (toll-free US and Canada) • (310) 885-4600 (world-wide)